Thursday, March 27, 2014


2014 Special Offering.  
Bright Incentives.  Big Savings.




Focus on Energy is set to roll out a limited time offer which includes several never before seen incentives.  From incentives on 2x2 LED troffers, all the way up to a $150 incentive to replace 1000 watt HID pole mounted heads, there’s sure to be something for everyone.  Two offerings to pay special attention to are the $30 per fixture incentive to install qualifying 2x4 LED troffers, as well as the $40 per fixture incentive to replace existing 6-lamp T8 high bays with qualifying LED fixtures.  With savings this big, projects are sure to see a faster return on investment.  Special incentives are good from April 1st to November 30th.  Click here for full details. 

Monday, January 13, 2014

2014 Focus on Energy Incentive Form and Catalog
Focus on Energy has made it easier to apply for lighting incentives in 2014. The form has been condensed into just 2 short pages.  Use the step by step lighting catalog, sorted by product category, to obtain the code number and dollar value needed for each product type.  Use this information to fill in the chart on page two of the form.  

Please reference page 4 for submittal instructions, and contact our Lighting Department for assistance.


References: 
2014 Focus on Energy Form
2014 Lighting Incentive Catalog
Hein Electric Supply Lighting Department


Introducing the 150 watt LED replacement for a 400 Watt Floodlight and Area Light.  Reduce energy consumption by 66% without sacrificing light output.  Available in 3 color temperatures, multiple mounting options, and your choice of white or bronze.  Please view more product information here and contact a member of our Lighting Department for more information. 

Tuesday, December 10, 2013

Changes to Minimum Product Requirements Needed to Earn Lighting Incentives Coming January 1, 2014!

In order to qualify for Focus on Energy incentives, lighting equipment has to match a model listed on a qualifying products list.  Focus on Energy uses DesignLights Consortium® (DLC)  as its qualifying list for most types of interior and exterior LED fixture and retrofit products. 

On January 1, 2014, DesignLights Consortium (DLC) will be updating the minimum specification requirements on their qualified products list. This change to the minimum requirements will affect the eligibility status of roughly 15% of products that are currently eligible for incentives.

We understand that you may already be planning projects that will be installed early next year. To assist with transition to the new requirements, Focus on Energy will implement a three month grace period (January 1, 2014 to March 31, 2014). During this grace period products that were eligible for incentives under DLC spec v1.7 (the current specifications), but do not meet DLC spec v2.0 (the new specifications) will still be considered as eligible for Focus on Energy incentives. 

Beginning on April 1, 2014 product eligibility will be limited to only products that fully match a model number that appears on the most current version of DLC v2.0 qualified products list posted on the DLC website at www.designlights.org.  Please note that the DLC list is updated almost daily.   

The new specification requirements can be viewed on DLC’s website by following the link below: http://www.designlights.org/Content/QPL/ProductSubmit/CategorySpecifications

For more information on these proposed changes please visit


Please feel free to contact a member of our Lighting Department to assist with these changes, navigation of the DLC list, and to choose the correct product that will earn the greatest incentives.  


Tuesday, November 19, 2013

A Note on How to Field Cut Elite Rope Light.

The question has come up as to where you can cut the Elite rope light, since there are no marks on the jacket indicating where to do so.  Cutting is permitted every three feet, starting where the power cord is attached to the coil.  At each cut area, there are two solder points approximately one inch apart from one another.  The cut can be made between these solder marks.  Attached is a picture that shows what the area should look like.  Note that there won't be any lamp leads within this area, so the void should be noticeable.

LED Yardblaster from Rab Lighting.

Impressive lumen output.
YBLED blasts the competition out of the yard. 26 Watts of LED generates a stunning 2689 lumen output, head and shoulders above the competition.

With or without arm.
YBLED Yardblaster is available in both wall and arm mount models,
making it easy to install in new and retrofit applications.

Energy savings.
Get a whopping 85% reduction in energy and 96 lm/W when replacing 175W MV. YBLED also replaces 100-150W HPS barn lights, delivering the efficiency you want in LED.

Light where you need it. Lots of it.
YBLED delivers impressive coverage and widespread light distribution for large yards, barns, docks, entrances, porches and driveways. Available in cool, neutral and warm color temperatures to match your landscaping needs.

Dusk to dawn.
YBLED has an integrated dusk to dawn photocell for peace-of-mind security and best-in-class energy efficiency.

Built to last.
The vandal resistant YBLED will stand up to tough environments in a big way, while keeping a small profile at under 6" in height.


Available January 2014.

Friday, November 1, 2013

NovaT 0-10V Dimmer and PowPak Dimming Module with 0-10V Control Now Available! 


With the introduction of LED lighting to our industry over the past couple years, we watched a new frontier emerge, a modern day version of the Wild West, if you will.  With no standardization on technology, it seems you see marketing for LED lamps everywhere you turn claiming "long life!" and "dimmable!"  

However, much of the product in the marketplace is unreliable since there are no standards that manufacturers must follow.  We are happy to say that this is changing.  The larger lighting manufacturers such as Cooper, Lithonia, and Cree are introducing hi-bay or lay-in LED fixtures comparable to the standard fluorescent fixtures standard with 0-10V dimming capability. 

The question that arises is what controls you use to dim these new 0-10V LED fixtures.  Our friends at Lutron Electronics recently released two very exciting product solutions:  the 0-10V Nova T wallbox control and the PowPak Dimming Module with 0-10V single room control, which works seamlessly with Lutron's line of Energi Tri-Pak products including Pico controls and Radio Powr Savr wireless occupancy sensors.

The NovaT 0-10V wallbox dimmer is rated for 120-277 volt control of 0-10V rated LED drivers or ballasts.  You can control loads up to 8 amps without a power pack.  The NovaT 0-10V dimmer is considered a small control, which means it installs nicely in a single gang box.  It is available in the standard matte finishes, and is coming soon to a Hein Service Center near you.
*Please note:  The NovaT 0-10V wallbox dimmer is only available in single pole. 

The PowPak dimming module with 0-10V control allows you to control 0-10V drivers, ballasts, or fixtures, and works seamlessly with the wireless daylight sensors, occupancy sensors, and Pico controls. Perfect for multi-location.  Also coming soon to a Hein shelf near you.

Both options are cost-effective at only $90 each, and are perfect for use in areas such as classrooms, hallways, warehouses, office spaces, and conference rooms. 

As always, our Lighting Department is happy to help.